Airaid 300-221 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
REV.11.5.13
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILTY! The air filter is reusable and should be cleaned periodically.
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
10. Install the supplied hump hose (#5) onto the filter
adapter using two #72 hose clamps (#19). Leave the
clamps loose for now.
13. Double check your work!
Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight.
14. Reconnect the negative battery cables!
12. Install the Airaid Premium Filter (#1) onto the
filter adapter and tighten the clamp. Install the weather
strip onto the top of the CAB starting at the right fend-
er and working your way towards the radiator.
11. Install the Airaid Intake Tube (#2) into the factory
turbo elbow and then into the hump hose. Adjust for
fit, and then tighten all three hose clamps. Reinstall the
intake temperature sensor and Mass Air Flow sensor
into the Airaid Intake Tube using three 8-32 button
head screws (#7) and #8 flat washers (#8). Do Not Use
The Factory Screws! Reinstall the factory wir ing
harness anchor into the hole in the Airaid Intake Tube.
FILTER IDENTIFICATION
700-469 Airaid Oiled Media 701-469 Airaid SynthaMax Dry Media - Red
702-469 Airaid SynthaMax Dry Media - Black 703-469 Airaid SynthaMax Dry Media - Blue
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Synthamax Air Filters do not re-
quire oil. Service air filter as need-
ed by cleaning with common non-
petroleum all-purpose household
cleaner and water. Simple Green®,
Formula 409® or equivalent works
great. Apply cleaner to outside of
air filter and allow to soak. Then
flush filter clean from the inside out
with a garden hose and repeat steps
if necessary. Do not apply high
pressure water or air to clean filter.
Allow filter to air dry and reinstall.