beautypg.com

Filter identification – Airaid 300-155 User Manual

Page 2

background image

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951

[email protected]

www.airaid.com

P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray

Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for questions

regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air filter element is protected from direct exposure to wa-
ter and debris; care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter
is reusable and should be cleaned periodically.

REV.11.4.13

FILTER IDENTIFICATION

720-128 Airaid Oiled Media 721-128 Airaid SynthaMax Dry Media - Red

722-128 Airaid SynthaMax Dry Media - Black 723-128 Airaid SynthaMax Dry Media - Blue

Synthamax Air Filters do not require oil.
Service air filter as needed by cleaning with
common non-petroleum all-purpose house-
hold cleaner and water. Simple Green®,
Formula 409® or equivalent works great.
Apply cleaner to outside of air filter and
allow to soak. Then flush filter clean from
the inside out with a garden hose and re-
peat steps if necessary. Do not apply high
pressure water or air to clean filter. Allow
filter to air dry and reinstall.

For your Oiled media filter

we suggest using the AIRAID

Filter Tune-Up Kit!

7. Re-connect the wire harness to the sensor on top of the Airaid

adapter.

8. Mount Airaid Premium Filter to the filter adapter and tighten

hose clamp, in addition; press the weather strip onto the top
of the Airaid cool air dam. (Hint: start the install at the top
corner of the cold air dam & work toward the edges)

9. Double check your work to be certain that all nuts, bolts, and

clamps are securely fastened.

10. Reconnect the negative battery cable.

Airaid Modular Intake Tube P/N 300-928 is also avail-

able for this application to replace the factory silencer

tube. Please contact your local dealer for details.

This manual is related to the following products: