Airaid 300-147 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
REV.11.1.13
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILTY! The air filter is reusable and should be cleaned periodically.
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
11. Install the factory IAT sensor into
the air filter adapter using two 8-32 but-
ton head screws (#12), and #8 flat wash-
ers (#13). Install the factory rubber
grommet and filter minder into the air
filter adapter.
10. Mount the air filter adapter (#5) onto the
CAD, using thr ee 1/4-20x 5/8” hex bolts
(#10), and three 1/4” flat washers (#11).
12. A.) Install the CAD by inserting the four
tabs into the side of the factory airbox.
B.) Relatch the three airbox clips onto the
CAD.
16. Double check your work!
Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight.
17. Reconnect the negative battery cable!
13. Slip the intake tube onto the air filter adapt-
er, and tighten the clamp.
A.
B.
15. Install the Airaid Premium Filter (#1) onto
the air filter adapter. Install the weather strip
(#6) onto the top of the CAD. (Hint: start at
one end, and work to the other).
14. Reconnect the IAT sensor wiring harness to
the sensor.
FILTER IDENTIFICATION
720-128 Airaid Oiled Media 721-128 Airaid SynthaMax Dry Media - Red
722-128 Airaid SynthaMax Dry Media - Black 723-128 Airaid SynthaMax Dry Media - Blue
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Synthamax Air Filters do not require oil.
Service air filter as needed by cleaning
with common non-petroleum all-purpose
household cleaner and water. Simple
Green®, Formula 409® or equivalent
works great. Apply cleaner to outside of
air filter and allow to soak. Then flush
filter clean from the inside out with a gar-
den hose and repeat steps if necessary.
Do not apply high pressure water or air
to clean filter. Allow filter to air dry and
reinstall
.