beautypg.com

Airaid 200-108 User Manual

Page 2

background image

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951

[email protected]

www.airaid.com

P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray

Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-

days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and should be cleaned periodically.

REV.11.8.13

FILTER IDENTIFICATION

700-430 Airaid Oiled Media

701-430 Airaid SynthaMax Dry Media - Red

702-430 Airaid SynthaMax Dry Media - Black 703-430 Airaid SynthaMax Dry Media - Blue

Synthamax Air Filters do not re-
quire oil. Service air filter as need-
ed by cleaning with common non-
petroleum all-purpose household
cleaner and water. Simple Green®,
Formula 409® or equivalent works
great. Apply cleaner to outside of
air filter and allow to soak. Then
flush filter clean from the inside out
with a garden hose and repeat steps
if necessary. Do not apply high
pressure water or air to clean filter.
Allow filter to air dry and reinstall.

For your Oiled media filter

we suggest using the AIRAID

Filter Tune-Up Kit!

WARNING! If your vehicle has a Vehicle Emission Control Information decal affixed to the factory airbox, a new re-
placement label must be obtained and installed in a readily visible position in the engine compartment in order to remain
CARB compliant. Failure to do so will prevent the vehicle from passing a smog check. Replacement labels can be ordered
from your local dealership. Regulations state that the VECI label shall not be affixed to any equipment which is easily de-
tached from the vehicle. Label placement, under the hood on a painted surface is recommended.

This manual is related to the following products: