AEC FSS Series 1.5- 10 HP Fountain Solution Systems - Manual (Page 8)

FSS Series Fountain Solution Systems Page 7
IAE-600
1 General Information
1-1 Introduction
AEC, Inc. Fountain Solution Systems Series Circulators are
reliable, accurate, and easy to use press cooling units. They are
available in air-, water-, and remote air-cooled designs in a range
of sizes from 1.5 to 40 tons. All are self-contained, some units are
fully portable, and shipped ready-to-use (remote air-cooled chillers
require field installation by qualified technicians).
Standard range of operation is 50°F to 70°F (10°C to 21°C).
A properly installed, operated, and maintained FSS Series
circulator provides many years of reliable operation. To get the
most satisfaction from your new circulator, read and follow the
instructions in this manual.
1-2 Necessary Documents
The following documents are necessary for the operation,
installation, and maintenance of an AEC, Inc./FSS Series Fountain
Solution Systems. Additional copies are available from AEC, Inc.
Make sure that the appropriate personnel are familiar with
these documents:
• This manual.
• The electrical schematic and connection diagram mounted
inside the control enclosure.
• The operation and installation manuals for accessories and
options selected by the customer.
• The Customer Parts List included in the information packet.