AEC VacTrac Series Conveying Systems - Manual (Page 3)

VacTrac™ Series Conveying Systems Page 3
Mechanical Components WH2-605A.4
Safety Considerations
AEC VacTrac conveying systems are designed to provide safe and
reliable operation when installed and operated within design
specifications and national and local safety codes.
To avoid possible personnel injury or equipment damage when
installing or operating this equipment, always use good judgment
and follow these safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
; OPEN, TAG, and LOCK ALL DISCONNECTS before
working on equipment. You should remove the fuses and carry
them with you.
; GROUND your VacTrac system properly before applying
power.
; Use extreme caution when working with your VacTrac system.
HIGH VACUUM can be dangerous. Keep body parts, tools,
clothing, and debris away from vacuum inlets.
; Do not jump or bypass any electrical safety control.
; Do not restore power until you remove all tools, test
equipment, etc.
; Only fully trained personnel familiar with the warnings and
instructions in this manual should work on this equipment.