AEC VacTrac Series Conveying Systems - Manual (Page 2)

Page 2 VacTrac™ Series Conveying Systems
WH2-605A.4 Mechanical Components
Write down your VacTrac system ________________ ________________
component serial ________________ ________________
numbers here for ________________ ________________
future reference ________________ ________________
________________ ________________
________________ ________________
________________ ________________
________________ ________________
________________ ________________
________________ ________________
________________ ________________
________________ ________________
________________ ________________
________________ ________________
Performance figures stated in this manual are based on a standard atmosphere of 59°F
(15°C) at 29.92” Hg (1,014 millibars) at sea level, using 60 Hz power. Altitude is an
important consideration when specifying vacuum conveying components. AEC can
advise you on proper selection and sizing of systems for your operating environment.
AEC is committed to a continuing program of product improvement.
Specifications, appearance, and dimensions described in this manual
are subject to change without notice.
Part No. A0536580 Bulletin No. WH2-605A.4 Effective 12/17/2002
Revision D
© Copyright AEC, Inc. 2002
All rights reserved.