AEC OS Series Gravimetric Batch Blenders - Manual (Page 81)

Page 80 of 118
The Printer Menu contains seven (7) options:
• Batch Interval
• Job Number
• Print Inventory
• Display Time & Date
• Set Time
• Set Date
• Test Printer
Note: If Printer option is enabled (turned on) and a printer is not connected
to the blender, the throughput will be significantly reduced!
5-8-28-1 Batch Interval or Timed Interval Printout
The Batch Interval item under the printout menu allows the
operator to set the number of batches between printouts or a
timed interval on the printouts.
Time Printout
When first entering the menu, the display will ask you for a
decision on whether the printout should be timed or by the
number of batches. The key is used to toggle
between the two options.
If you want to print out on a time format, press the
key. The screen will then prompt to set the time interval in
hours.
If you want to change the hours between print outs, press the
key to change the value to the desired time. Then
press to keep.
The screen will then scroll to a screen to program in when you
want to start the timed printouts. Simply select the time (24-
hour clock) and enter.
Print Out Scheduled At : 0:00
Press START to Change, ENTER to keep