AEC OS Series Gravimetric Batch Blenders - Manual (Page 79)

Page 78 of 118
5-8-27-1 Save the Current Recipe to the Book
The save current to book function allows the operator to save
the contents of the current recipe to the recipe book under a
desired number.
Upon selecting this function, the operator will be prompted for
a reference recipe number. This may be any number from 1 to
99.
The assigned recipe number will be used for all further
references to this recipe until deleted. The operator should be
familiar with the recipe numbers used. We suggest keeping a
loose-leaf notebook with 100 tabbed pages as a reference to
what is kept in the blender so this can be the standard for all
blenders in the plant, etc.
5-8-27-2 Load a Saved Recipe from the Book
The load from book function allows the operator to retrieve a
previously stored recipe from the recipe book and install it into
the current recipe menu. This will overwrite the current recipe,
so make sure that it has been saved to the book before
installing a new recipe in its place.
Note: If replacing the current recipe with one that is downloaded
from the Recipe Book, make sure that the previous recipe
has been saved, as it will be overwritten by the new
downloaded recipe.
5-8-27-3 Delete Recipe
The delete recipe function is used to eliminate old or outdated
recipes from the recipe book function. This function will prompt
the operator for a recipe number. Once a valid recipe number
is entered, the operator will be asked once again to verify this
operation. Once a recipe number is deleted, the contents of
that recipe are lost. The recipe number may be used again in
the future for new recipes.
5-8-27-4 Show Valid Recipes
The show valid recipes function is incorporated to display all of
the recipe numbers in the recipe book that contains valid
values. The display may contain several pages of information.
This will require the operator to page through the displays to
determine if the desired recipe is already in use. Scroll the
display by pressing the “ENTER” key.