AEC OS Series Gravimetric Batch Blenders - Manual (Page 22)

Page 21 of 118
1-12-7 Operator Control Panel
The operator control panel includes an 8 foot (2.4 m) cable and can
be remote mounted adjacent to the blender. The panel can be
unplugged and removed if necessary.
The controller includes an embedded computer. This design provides
excellent blender performance along with an easily replaceable
control panel in the unlikely failure of any computer or electronic part.
The display and keypad menu format is very simple. After installation
and setup, simply enter in the recipe and start the blender.
If it is desired to have a local display and control of the blender closer
to a remote operator station, an optional RS485 remote control panel
(RCP) is available.
Note: The panel keypad on your unit may be slightly different than shown.
Adjust component settings in EZ recipe mode
Stop at “End of cycle” key “Abort” cycle key
“Backup” key
“Enter” key
“Start” blend cycle key
“Clear” key
Numeric entry keys