Set the schedule – ACTi GNR-3000 V3.0.09 User Manual

Page 93

GNR-3000 System Administrator’s Manual

Set the Schedule

Here you can configure camera

’s recording schedule on 7 days / 24 hours basis. The schedule

is split into segments of 20-minute-length. By default, once a device is added to the system, its

schedule is automatically set to full time schedule recording and event handling. You should

configure it according to your system plan.

Go to Setup-Schedule tab, on Schedule Setting panel:

1. Select the recording mode from

“Recording Mode Bar”

:Continuous recording that channel

: Records a period of the detected motion event. Please make sure you

have configured the motion settings on Setup page  Device tab beforehand.

:Event handling is activated.

(Please refer to How to Edit an Event Rule on page 99 for Event Rules settings)

: Clear the setting

+ : Continuous recording + event handling

+ : Event recording + event handling

2. Click and drag over the

“Time Track” to set time period.

Time Track

Time Setting Quick Buttons

Recording Mode Bar