ACTi GNR-3000 V3.0.09 - Manual (Page 35)

www.acti.com
GNR-3000 System Administrator’s Manual
35
More instruction about trouble-shooting provided by Microsoft TechNet:
http://technet.microsoft.com/en-us/library/cc787481(v=ws.10).aspx#BKMK_7
http://technet.microsoft.com/en-us/library/cc737098(v=ws.10).aspx
Reactivate the Disk
When the disk appears Online (Errors), Offline, Unreadable or Missing, try this step to bring
this disk back to Online status.On Disk list, righ-click on the underlying disk that does not
appear Online, and select “Reativate Disk”.
You may refer to the online help document provided by Microsoft TechNet for more details -
http://technet.microsoft.com/en-us/library/cc786948(v=ws.10).aspx
If this step failed to return the disk to Online status, please Check the Physical Connection.
Check the Physical Connection
The abnormal status: Online (Errors), Offline, Unreadable or Missing) might result from the
physical disconnection from the bay. Observe the front of the disk tray, if the HDD Status LED
is not lit, turn off the unit, install the disk again following the steps in Hard Disk Installation on
page 19, and check the disk status in Disk Management.
You may refer to the online help document provided by Microsoft TechNet for more details-
http://technet.microsoft.com/en-us/library/cc785259(v=ws.10).aspx
If this step failed to return the disk to Online status, please Replace the Disk.
HDD Bay Status
Indicator