ACTi GNR-3000 V3.0.09 - Manual (Page 21)

www.acti.com
GNR-3000 System Administrator’s Manual
21
Connect the Devices
Follow the procedures to connect the devices. These devices are supposed to get connected
in the sequence shown below.
1. Connect the VGA monitor using the VGA cable supplied by the monitor manufacturer.
2. Connect the USB devices (e.g. the mouse, the keyboard or the joystick) and the audio
devices (e.g. the microphone and the speaker) to the audio output and audio input.
3. Connect the eSATA storage device (optional).
4. Attach the network cable to one of the LAN ports.
5. Plug the power adapter into GNR and electricity outlet.
6. Connect GNR with another network segment (e.g. remote client connection, SMTP
service) via the other LAN port (optional).
5
1
2
3
4
6
Tip
GNR-3000 supports iSCSI NAS. For detailed information on how to use iSCSI NAS with
GNR-3000, please refer to our article on
Using iSCSI NAS with NVR .