Epson S5U1C62000A - Manual (Page 221)

S5U1C62000A MANUAL EPSON 209
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
CHAPTER 9: DEBUGGER
tf
(trace file)
Function
This command saves the specified range of the trace information displayed in the [Trace] window by
the td command to a file.
Format
(1) >tf [ ]
↵
(direct input mode)
(2) >tf
↵
(guidance mode)
Start pointer ?
↵
End pointer ?
↵
File Name ?
↵
>
: Start pointer; decimal (min 0)
: End pointer; decimal (max 2,730)
: Output file name (path can also be specified)
Examples
Format (1)
>tf trace.trc
↵
... Saves all trace information extracted by the td command.
Tracing into file ... OK!
>
Format (2)
>tf
↵
Start point ? 0
↵
End point ?
↵
... The oldest data is specified by the [Enter] key.
File name ? test.trc
↵
Tracing into file ... OK!
>
Notes
• If an existing file is specified, the file is overwritten with the new data.
• The default value of is "0", the default value of is the last location.
GUI utility
[Trace | Trace File …] menu item
When this menu item is selected, a dialog box appears allowing specification of the parameters.
Enter a start pointer, end pointer and a file name, then
click [OK].
To save all the trace information, enter 0 to the [Start Point]
box and leave the [End Point] box blank.
The file name can be selected using a standard file selec-
tion dialog box that appears by clicking [Browse...].