Epson S5U1C62000A - Manual (Page 144)

132 EPSON S5U1C62000A MANUAL
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
CHAPTER 9: DEBUGGER
[Go from Reset] button
This button resets the CPU and then executes the target program from the program start address
(0x100). It performs the same function when the gr command is executed.
[Step] button
This button executes one instruction step at the address indicated by the current PC. It performs
the same function when the s command is executed.
[Next] button
This button executes one instruction step at the address indicated by the current PC. If the instruc-
tion to be executed is call or calz, it is assumed that a program section until control returns to the
next address constitutes one step and all steps of their subroutines are executed. This button
performs the same function when the n command is executed.
[Reset] button
This button resets the CPU. It performs the same function when the rst command is executed.
9.5.6 [Break] Button
Use this button to set and clear a breakpoint at the address where the cursor is located in the
[Source] window. This function is valid only when the [Source] window is open. Note that select-
ing a break address by clicking on the address line is valid for only the lines that have actual code
and is invalid for the source-only lines.
9.5.7 [Help] Button
This button displays an About dialog box for the debugger.