Gr (go after reset cpu) – Epson S5U1C62000A User Manual

Page 183

Text mode
Original mode

S5U1C62000A MANUAL

EPSON

171

(S1C60/62 FAMILY ASSEMBLER PACKAGE)

CHAPTER 9: DEBUGGER

(go after reset CPU)

Function

This command executes the target program from the boot address after resetting the CPU.

Format

>gr

↵

(direct input mode)

Operation

This command resets the CPU before executing the program. This causes the PC to be set at address
0x100, from which the command starts executing the program.
Once the program starts executing, the command operates in the same way as the g command.

GUI utility

[Run | Go from Reset] menu item, [Go from Reset] button

When this menu item or button is selected, the gr command is executed.

[Go from Reset] button