Welltech VoIP ATA series V.303 - Manual (Page 94)

ATA Web user guide
Welltech Technology Co., Ltd.
94 / 114 2015/1/8
10.5 Advanced (Advanced Settings)
10.5.1 Function
Provide anonymous call, billing signal, encryption, syslog and FXS/FXO parameter
function setting.
10.5.2 Instruction
Figure 1: 1FXS(ATA171plus, ATA-171), 2FXS(ATA172plus, ATA-172) and
1FXS+1PSTN(ATA-171P).
(Figure 1)
Item Decription
ICMP Not Echo Default is Disable. When ICMP was set to Enable, ATA doesn’t
response PING command.
Option: Disable, Enable
Send Anonymous
CID Default is Disable. When ATA was set to Type 1 or Type 2 , ATA
will send out anonymous to SIP Server (or to remote party)
instead of CID.
Type 1 (
[email protected] )
Type 2 ( [email protected])
* Your Register Proxy server must support this function.
Management
from WAN Default is Enabl which allows web management access from
WAN port. When it was set to Disable, ATA only allow web access
vial LAN port.
Option: Disable, Enable
Stop Feature
Tone Default is Disable. This feature is to provide alert tone at the
following messages.