Welltech VoIP ATA series V.303 - Manual (Page 22)

ATA Web user guide
Welltech Technology Co., Ltd.
22 / 114 2015/1/8
Item Description
and #, *.
PS: If account registers fail, it will not be switched.
Auto Dial Time Default is 5 seconds , the option range is 3 to 9 seconds. ATA will
dial out automatically when user didn’t enter any digit within this
time period.
Use # as send
key Default is Enable. Define [#] as end of dialing key.
Enable: When ATA received [#], it will dial out immediately. (no
need wait for the auto dial out time).
Disable: follow [Auto Dial Time] time to dial out.
# Format is %23 Default is Disable; Use [#] word to send %23 singal. Provide
drop-down options: Disable, Enable.
Auto PSTN
backup
Default is Disable. Provide PSTN auto backup function. When SIP
account register to SIP Server fail, FXS port was switched to
PSTN line automatically if ATA was set to enable. In the
meantime, the FXS port’s dial tone was generated from PSTN
line.
* Please make sure the PSTN line connect to ATA correctly if you
want to enable this function.
PSTN feature
Code
Default is 0* . This code is to switch the route to PSTN port
manually. When you dial 0* you will hear dial tone from PSTN
line and the call will dial out through PSTN line.
Maximum length
is 7 digits. It only allows to enter number, * and # digits.
Routing Type Default is “Disable” (OFF) and provide IP, FXO , and Disable
features. The call behavior is based on Routing Rule. According
to the routing rule, IP or FXO dail out function can be selected.
Routing Rule “D” is a dropping prefix function and "+" is used to add multiple
routing rule.
Example: Routing rule is D007+009.
1. When the entered numbers start with 007, such as
00782280220, the condition is satisfied with
D007 . The routing
rule first drops 007 and replace the numbers with 82280220.
Then refer to the “
Routing To ” setting to select the dialing route.
2. When the entered numbers start with 009 , such as
00982280220, the condition is satisfied with 009 . The routing
rule will not drop any prefix, and then refer to the “Routing To”
setting to select the dialing routes.
Submit Save the configuration.
Figure 3: 1FXS+1PSTN, ATA-171P device.