Welltech VoIP ATA series V.303 - Manual (Page 5)

ATA Web user guide
Welltech Technology Co., Ltd.
5 / 114 2015/1/8
 Call Forward
 Caller ID
 3-way conference
Configuration
DTMF Function  Web Browser
 Telnet
 IVR/Keypad
 In-Band DTMF
 Out-of Band DTMF
 SIP Info
Firmware Upgrade
SIP Server
 Registrar Server (Five SIP accounts)
 Outbound Proxy
 TFTP
 HTTP
4. Keypad Interface from analog phone set of ATA
You can use analog phone set’s keypad to operate, configure and listen to
configuration (IVR play voice messages in English) at ATA without using web
interface. The following table is the access code of each feature. Off-Hook
analog phone and dial
IVR access code and follow the voice prompts to
configure ATA IP address and other features.
Group IVR Action IVR access code Parameter(s) Notes:
Function Dial out from
PSTN Line
0＊ None
Press 0* can route your call
to PSTN Line from analog
phone set directly, you can
dial out from PSTN Line.
(For model ATA-171P and
ATA-171M only)
Function
Unlock
keypad
setting
#190# None
After you unlock keypad
setting, you may start to
configure ATA from keypad.
Function Reboot #195# None
After you hear “Option
Successful” from IVR
message, please hang-up.
The system will reboot
automatically.
Function Factory Reset #198# None
System reboot
automatically. WARNING:
ALL “User-Changeable”
NONDEFAULT SETTINGS
WILL BE LOST including
network and service
provider data.
Function
Enable PPTP
client
#116# None
System will automatically
reboot and PPTP client will
be enabled
Function Disable PPTP
client
#117# None
System will automatically
reboot and PPTP client wll be
disabled
Function Enable VLAN #118# None
System will automatically
reboot and VLAN will be
enabled.
Function Disable VLAN #119# None
System will automatically
reboot and VLAN will be
disabled
Function
Enable Call
Waiting
#138# None
System will automatically
reboot and Call Waiting will
be enabled.