Welltech VoIP ATA series V.303 - Manual (Page 7)

ATA Web user guide
Welltech Technology Co., Ltd.
7 / 114 2015/1/8
Setting
Set Network
Mask
#113xxx*xxx*xx
x*xxx#
Enter value-using numbers on
the telephone keypad. Use the
* (star) key when entering a
decimal point.
Must set Static IP first.
Setting
Set Gateway
IP Address
#114xxx*xxx*xx
x*xxx#
Enter IP address using
numbers on the telephone
keypad. Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
Setting
Set Primary
DNS Server
#115xxx*xxx*xx
x*xxx#
Enter IP address using
numbers on the telephone
keypad. Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
Setting Set Codec #130+[1-8]#
1:G.711 u-Law, 2: G.711
a-Law, 3:G.723.1, 4: G.729a,
5: G.726 16K, 6:G.726 24K,
7: G.726 32K, 8: G.726 40K,
You can set the codec you
want to the first priority.
Setting
Set Handset
Gain
#131+[00~15]# Handset Gain from 0~15
You can set the Handset
gain to proper value, default
is 6
Setting
Set Handset
Volume
#132+[00~12]# Handset Volume from 0~12
You can set the Handset
volume to proper value,
default is 10
Setting
Set Auto
Configuration
Mode
#137X#
Select the auto configuration
mode, in the X field, you can
press the following; 0:OFF,
1:TFTP, 2:FTP
You can set the auto
configuration method you
want, default is off
Setting
Set Auto
Configuration
For TFTP
Server
#135xxx*xxx*xx
x*xxx#
Enter IP address using
numbers on the telephone
keypad. Use the * (star) key
when entering a decimal
point.
Must set auto configuration
method to TFTP first
Setting
Set Auto
Configuration
For FTP
Server
#136xxx*xxx*xx
x*xxx#
Enter IP address using
numbers on the telephone
keypad. Use the * (star) key
when entering a decimal
point.
Must set auto configuration
method to FTP first