Welltech VoIP ATA series V.303 - Manual (Page 19)

ATA Web user guide
Welltech Technology Co., Ltd.
19 / 114 2015/1/8
Item Description
use “Prefix＂field number instead.
Disable:
Add prefix number in front of the called number when
called number match “Rule” number
Enable: Replace “Rule” number to “Prefix” number when called
number match “Rule” number
Prefix Added or replace number. For numbers only and maximum
length is 8 digits.
Rule Define number manipulation rule.
It can be numbers or signs (
+, x ). The (+) means “Or”, (x)
means any numbers which are from 0 - 9. Maximum length is 40
digits.
NOTE: The first digit can’t be 0 if it is 2 digits number.
Index Index number. There are 8 dial rules to enter.
Dial Now Rule Automatic dialing Now (immediately). When the dialing rule
matches the contents in this column, the automatic dialing
function will be executed without waiting for " press # " or “ Auto
Dial Time ” to dial out. Both numbers and symbols can be
entered. The number length is 80 digits.
Symbols: only allow
*, #, + and x .
+: represents "or".
x: any number between 0 - 9.
Note: The 1st digit number can not be set to "0", because
"0" will not determine as the Dial Now Rule. If the Dial
Now is set to 0xxxx, the system will not follow the dialing
rule to dial out.
Realm 1 prefix Default setting is 1*. When you dial 1* + called number, ATA will
switch to the first account and dial out the called number
immediately. Maximum length is 7 digits.
Realm 2 prefix Default setting is 2*. When you dial 2* + called number, ATA will
switch to the second account and dial out the called number
immediately. Maximum length is 7 digits.
PS: If account registers fail, it will not be switched.
Realm 3 prefix Default setting is 3*. When you dial 3* + called number, ATA will
switch to the third account and dial out the called number
immediately. Maximum length is 7 digits.
PS: If account registers fail, it will not be switched.
Realm 4 prefix Default setting is 4*. When you dial 4* + called number, ATA will
switch to the fourth account and dial out the called number
immediately. Maximum length is 7 digits.
PS: If account registers fail, it will not be switched.
Realm 5 prefix Default setting is 5*. When you dial 5* + called number, ATA will
switch to the fifth account and dial out the called number
immediately. Maximum length is 7 digits.
PS: If account registers fail, it will not be switched.
Auto Dial Time Default is 5 seconds . The configuration range is 3 to 9 seconds .
ATA will dial out automatically when user didn’t enter any digit
within this time.
Use # as send
key
Default is Enable. Define [#] for end of dialing key.
Enable: when ATA received[#], it will dial out immediately. (no
need wait for the auto dial out time)