Welltech VoIP ATA series V.303 User Manual
Page 54
ATA Web user guide
Welltech Technology Co., Ltd.
54 / 114
2015/1/8
8.2
DMZ & MAC Clone
8.2.1 Function
Provide DMZ and MAC Clone configuration.
8.2.2 Instruction
Item Decription
DMZ Type
Default is Disable. When set to Enable, all network packages will
be sent to the IP address which was defined from [Assigned IP
Address].
DMZ IP Address
Default: 0.0.0.0.
The assigned IP address type is xxx.xxx.xxx.xxx of maximum 15
bytes.
MAC Clone Type
Default is Disable. When it was set to Enable, ATA will get your
PC computer’s MAC address. Option: Disable, Enable.
NOTE:
1. When use MAC Clone function, ATA must set ’’LAN Mode” to
NAT mode and enable DHCP server.
2. You have to login ATA to configure via LAN port to set the
MAC Clone function.
Submit [button]
Save the configuration.
NOTE :
If you want to resume your original MAC address, please use “Restore Default
Setting” command at Webpage configuration.