Welltech VoIP ATA series V.303 User Manual
Page 41
ATA Web user guide
Welltech Technology Co., Ltd.
41 / 114
2015/1/8
Primary DNS
Default: 168.95.192.1.
The enter type is xxx.xxx.xxx.xxx of 15 bytes.
Secondsond DNS Default: 168.95.1.1.
The enter type is xxx.xxx.xxx.xxx of 15 bytes.
MAC Address
Shows the MAC ID address.
System Name
Default: VOIP_Phone.
This column can enter numbers and strings; maximum length is
15 bytes.
PPPoE User
This column can enter numbers and strings; maximum length is
32 bytes.
PPPoE Password
This column can enter numbers and strings; maximum length is
32 bytes.
PPPoE Service
Name
This column can enter numbers and strings; maximum length is
32 bytes.
*The information of this column is provided by ISP, if you don’t
known what is the data, do not Setup it.
PPPoE AC Name
This column can enter numbers and strings; maximum length is
32 bytes.
*The data of this column is provided by ISP, if you don’t known
what is the data, do not setup it.
Submit [Button]
Save the settings.
7.1.3 Operate Instruction
Example 1: Check Host Name
Step 1: In [WAN Setting] web page, Setup [WAN Active: DHCP, System Name:
VOIP_PHONE] (See Figure 1).
(Figure 1)
Step 2: In [System Status] web page, User can view [WAN] port network status (See
Figure 2).