Welltech WellGate M1 - Manual (Page 48)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
48 / 58 2014/12/1
Item Description
New username Enter new username which can be Numbers or strings,
maximum length is 32 digits.
New password Enter new password which can be Numbers or strings,
maximum length is 32 digits.
Confirmed
password
Enter new password to confirm the password setting.
User Normal User: ATA only provides one normal user account.
This level only modify below setting, [Phone: Phone Book, Call
Service, Genereal, Volume; Network: WAN, DDNS, NAT: LAN,
DMZ, Virtual Server; Management: Status Log, Language, Save
& Reboot, Logout].
Default user name: user, Default user password: test.
New username Enter new username which can be Numbers or strings,
maximum length is 32 digits.
New password Enter new password which can be Numbers or strings,
maximum length is 32 digits.
Confirmed
password
Enter new password to confirm the password setting.
Submit [button] Save the configuration.
Reset [button] Clear the configuration.
Figure 2: System Authority
(Figure 2.)
Item Description
System System user: ATA only provides one administrator account.
This level can modify below setting, [Phone: Phone Book, Dial
Plan, Call Service, Genereal, Volume; Network: WAN, DDNS,
VLAN, VPN, SNTP; NAT: LAN, DMZ, Virtual Server; SIP: Service,
Code, Stun; Management: Status Log, Auto Config, Auto
Update, New Firmware, Passowrd, Default, Language; Save &
Reboot, Logout].
Default user name: system, Default user password: test.
New username Enter new username which can be Numbers or strings,