3 p2p call example – Welltech WellGate M1 User Manual
Page 15
WellGate M1 Web user guide
Welltech Technology Co., Ltd.
15 / 58
2014/12/1
Item
Description
Code
maximum length is 8 bytes.
Forward Number Set up the GSM incoming call forward number. This column can
only enter numbers; maximum length is 16 bytes.
In P2P mode, please fill in receiver device IP address and port
number. For instance, 192.168.1.10:5060
In Proxy mode, please fill in SIP account number for SIP Server
or IP-PBX server to transit this call to remote receiver.
Maximum Call
Out Time
Default is 0. Shows maximum call out time. Set up outgoing call
time limit. The data range 0~6500 seconds. 0=No time Limit.
Current Call Out
Time
Shows outgoing call time already used.
Submit [button] Save the configuration.
Reset Timer
[button]
Reset
Current Call Out Time
data.
5.3
P2P Call Example
Suppose there are one Wellgate M1 (
IP: 192.168.1.2
) and one ATA172plus (
IP:
192.168.1.3
) and ATA172plus SIP port is
5060
. They are workin in P2P mode to call each
other. Here are configuration tips on both devices.
1. WellGate M1 has GSM incoming call to remote port 2 of ATA172plus via P2P call.
At GSM M1 gateway
Forward Number
configure at
192.168.1.3:5062
. Since
ATA172plus SIP port is 5060 which is used for port1, port 2 uses 5062. If ATA172plus
SIP port is 8088, then port 2 SIP port should be 8090. When there is an GSM
incoming call at Wellgate M1, it will ring to port 2 of ATA172plus automatically.
2. ATA172plus wants to make a call to GSM network at 0933123456 via WellGate M1.
At ATA172plus, go to
Phone book
of webpage to configure. Put
Name field as 301
and
Number field as
At WellGate M1 gateway, go to webpage: SIP Advanced Only Accept Trustred
Certificate Disable, to allow accepting P2P incoming call.
Dial 301 from ATA172plus will send this number 0933123456 to GSM network
automatically. ATA172plus has 140 records of phone book to be used for P2P call.
WellGate M1 only provides one-stage P2P outgoing call to GSM BTS network.