Welltech WellGate M1 - Manual (Page 29)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
29 / 58 2014/12/1
8. SIP Setting
Provide Service, Code, Advanced and STUN function.
8.1 Service (SIP register setting)
8.1.1 Function
Provide SIP server’s register accounts.
8.1.2 Instruction
(Figure 1)
Item Description
Realm Active Default: Disable. When you Enable this function, this device
work at SIP Proxy mode and start to register at SIP Register
Server or IP-PBX server. In other word, this device was enabled
at SIP proxy mode.
Provide options: Disable, Enable.
Display Name This column can enter numbers and strings (support: 0~9, a~z,
@, _, -, *, #, ., +, :); maximum length is 31 bytes.
Phone Number Set up assigned Phone Number from SIP Register Server or
IP-PBX server.
This column can be numbers and strings (support: 0~9, a~z, @,
_, -, *, #, ., +, :); maximum length is 31 bytes.
Authentication ID Set up the SIP Register ID.
This column can be numbers and strings(support: 0~9, a~z, @,
_, -, *, #, ., +, :); maximum length is 47 bytes.
Authentication
Password
Setup SIP Registration Password.
This column can be numbers and strings; maximum length is 31
bytes.
Domain Server Setup Domain Server.
This column can enter IP or Domain Name with the format of
xxx.xxx.xxx.xxx; maximum length is 63 bytes. If the Domain
Server has Port Number, please add it at the end of Domain
Name, for instance: nat.voiptalk.org:5065.
Proxy Server Set up Proxy Server or IP-PBX Server.
This column can enter IP or Domain Name with the format of
xxx.xxx.xxx.xxx ; maximum length is 63 bytes. If the Domain
Server has Port Number, please add it at the end of Domain
Name, Example: nat.voiptalk.org:5065 .