Welltech WellGate M1 - Manual (Page 34)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
34 / 58 2014/12/1
Item Description
This column can only enter numbers; maximum length is 5 bytes
with the range of 1024~40000.。
If you want to Set up a fixed port, please Set up the same value
of Start and End Port.
If you want to Set up a range, the left column is Start Port, the
right Port is End Port.
Local RTP Port Default: 20000~21999.
Set up the Start and End RTP Port Range of phone 1.
This column can only enter numbers; maximum length is 5 bytes
with the range of 1024~40000.
If you want to Set up a fixed port, please Set up the same value
of Start and End Port.
If you want to Set up a range, the left column is Start Port, the
right Port is End Port.
Hold Type Default: RFC 2543 (0.0.0.0).
Set up Hold (define by RFC).
When this function is on, the information of [Connection
Information (c): IN IP4 xxx.xxx.xxx.xxx] will change IP to the
device of executing the function.
Provide options: RFC2543 (0.0.0.0), Type1 (Send only), Type2
(inactvie).
DTMF Type Default: RFC 2833.
InBand: When you enter key information, the [Ethereal] will not
show it.
RFC2833: When you enter key information, the [Ethereal] will
show [RTP Event].
SIP Info: When you enter key information, the [Ethereal] will
show [Request: Info].
Provide options: InBand, RFC2833, SIP Info.
RFC2833 + Inband: When you enter key information, LP399
sends Inband message and [RTP Event] message.
SIP Info + Inband: When you enter key information, LP399
sends Inband message and [Request: Info] message.
RPort Default: Disable; Set up RPort function. When this function is on,
the [Rport] message will add in [Message Header].
Provide options: Disable, Enable.
*This function must be supported by Server.
Voice QoS
(Diff-Serv) Default: 40; This column can only enter numbers; maximum
length is 2 bytes with the range of 0~63.
SIP QoS
(Diff-Serv) Default: 40; This column can only enter numbers; maximum
length is 2 bytes with the range of 0~63.
Use DNS SRV Default: Disable.
When this function is on, the package will show [DNS, Standard
query SRV_sip_upd.xxx.xxx.xxx].
Provide options: Disable, Enable.