Welltech WellGate M1 - Manual (Page 18)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
18 / 58 2014/12/1
6.2 DDNS
6.2.1 Function
Dynamic DNS provides a residential user's Internet gateway that has a variable,
often changing IP address with a well known hostname resolvable through standard DNS
queries.
6.2.2 Instruction
Item Description
Active Default is Disable. The DDNS function will be enabled when you
set to Enable.
Host name Enter Host name which can be IP Address or Domain Name.
Format: xxx.xxx.xxx.xxx. Length is 63 digits.
User Name Enter user’s name for registering to DDNS Server.
Password Enter the password. Maximum length is 63 digits.
E-mail address Enter E-mail address. Maximum length is 63 digits.
DDNS Server List Default is Disable; Configure your service provider here. Provide
option: User input, members.dyndns.rog and www.dtdns.com
mode.
DDNS Server Enter DDNS Server which can be IP Address or Domain Name.
Format: xxx.xxx.xxx.xxx. Maximum length is 63 digits.
Type Default is dyndns. Provide 3 options: dyndns, statdns and
customer mode.
Wild Card Default is Enable. Provides 3 options: Enable, Disable and
Nochg.
NOTE: Please make sure your DDNS provider supports this
feature when you set it to enable.
BACKMX Default is Disable; The backup MX function will was activate
when you set it to enable. It provides two options: Disable and
Enable.
NOTE: Please make sure your DDNS provider supports this
feature when you set it to enable.
Off Line Default is Disable. The Off Line function will be activate when