Welltech WellGate M1 - Manual (Page 25)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
25 / 58 2014/12/1
7. NAT
Provide [LAN, DMZ and MAC Clone, Virutal Server] function.
7.1 LAN
7.1.1 Function
Provide LAN port configuration setting including DHCP server function.
7.1.2 Instruction
Item Explanation
Device Active Default: NAT.
Setup the routing function of LAN Port.
Provide options: Bridge, NAT.
Bridge: When you Setup Bridge, [WAN & LAN] Port are all in the
same IP domain, just like in the same network switch.
NAT: When you Setup NAT, [WAN & LAN] Port are in the different
IP domain. LAN Port work as DHCP server when you Enable
DHCP Server Active function.
LAN IP Address Default: 192.168.123.1.
The type is xxx.xxx.xxx.xxx of 15 bytes.
LAN MAC Address Show LAN MAD ID address.
Enable DHCP
Server
Default: Enable; When you Disable this function, LAN Port will
not be a DHCP Server.
Provide options: Enable, Disable.
IP Address Default: 150~200; Setup the IP address range of DHCP Server.
This column can only be numbers; maximum length is 3 bytes
with the range of 1~254.