Welltech WellGate M1 - Manual (Page 22)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
22 / 58 2014/12/1
6.5 NTP
6.5.1 Function
Provide time synchronization and daylight saving function.
6.5.2 Instruction
Item Description
Active Default is Enable. This feature is to Enable/Disable Time Sync
feature. When it was set to Disable, you may configure Time
manually.
Primary Server Default is north-america.pool.ntp.org to be Primary time sync
server. It can be IP address or Domain Name. The format is
xxx.xxx.xxx.xxx. Maximum length is 63 digits.
Secondary
Server
Default is asia.pool.ntp.org to be Secondary time sync server. It
can be IP address or Domain name. The format is
xxx.xxx.xxx.xxx. Maximum length is 63 digits.
Time Zone Deafult is GMT + 08:00 (hh:mm). Provide option is : +/-,
00~13(hour) 00, 15, 30, 45 (minute).
Synchornize Time Default is 24 Hour.To configure the interval time for Time Sync.
The option are : 1 min., 5 min., 30 min., 1 hour, 3 hour, 6 hour,
12 hour, 24 hour.
Daylight Saving
Time
Default is Disable. Define the Daylight Saving time. When you
set to Enable, time will be adjusted by the Daylight Saving
parameter.
DST Offset Default is +1 Hour. Adjust the Daylight Saving time. Option: -2
hour, -1 hour, +1 hour, +2 hour.
DST Start Date Configure the Daylight Saving start time.
Option: Day of Month, Week of Month.