Welltech WellGate M1 - Manual (Page 16)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
16 / 58 2014/12/1
6. Network environment
Provide [WAN, DDNS, VLAN, VPN, SNTP] function setting.
6.1 WAN (network setting)
6.1.1 Function
Provide WAN port configuration.
6.1.2 Instruction
Item Description
Type Default is DHCP Client and provides Fixed IP, DHCP (gains IP
Address automatically) and PPPoE: ADSL Dialing method.
IP Address Current IP Address list or any IP Address (IPv4 format). If you
would like to change IP Address, please set up IP Type as “Fixed
IP” first. Maximum length is 15 digits.
Subnet Mask Current Subnet list. A subnetwork, or subnet, is a logically
visible subdivision of an IP network. The format is
xxx.xxx.xxx.xxx. Maximum length is 15 digits.
Default Gateway Current default gateway list. Gateway is a node (a router) on a
TCP/IP network that serves as an access point to another
network. The format is xxx.xxx.xxx.xxx. Maximum length is 15
digits.
DNS Type Default is Auto. Define DNS server mode to be Fixed and Auto.
Fixed: Manual set DNS server.
Auto: Network server provides DNS. It only supports in Type:
DHCP Client and PPPoE.
DNS Server1 Default: 168.95.192.1. It can be IP address or Domain Name.
Format: xxx.xxx.xxx.xxx. Maximum length is 15 digits.
DNS Server2 Default: 168.95.1.1. It can be IP address or Domain Name.
Format: xxx.xxx.xxx.xxx. Maximum length is 15 digits.
MAC ID Display MAC address information.