Welltech WellGate M1 - Manual (Page 40)

WellGate M1 Web user guide
Welltech Technology Co., Ltd.
40 / 58 2014/12/1
9.2 Auto Configuration
9.2.1 Function
Provide 3 kinds of provision methods. ( TFTP, FTP and HTTP )
9.2.2 Instruction
Item Description
Provision Active Default: Disable. When this function is on, this device will
download the MACID.dat from the designated provision Server.
Provide options: Disable, TFTP, FTP and HTTP.
2 Steps
Configuration
Default: Disable. Set up 2 Steps configuration, get the common
settings first, then get the SIP accounts and passwords
secondly.
Provide options: Disable, Enable.
*This function must be supported from SIP Server.
Server Auto
Discovery
Default: Disable. DHCP TFTP Option 66 (TFTP): DHCP Server will
offer the Option 66 Server IP address into the column of system
[TFTP Server] when it assigns IP.
Broadcasting: Discovering the Server by broadcasting, the
Server will send the information of Type and Server to LP399, it
will fill in these information to the corresponding columns.
Provide options: Disable, DHCP TFTP Option 66 (TFTP),
Broadcasting.
*This function must be supported by Server.
Scheduling Default: Disable; Execute the Configuration regularly.
When this function is on, system will check the Configuration
Server by [Next Config Time].
Provide options: Disable, Enable.
Note: The time parameter use [Auto Update Setting] web page’s
[Scheduling Time & Date].
TFTP Server This column can only enter IP with the format of
xxx.xxx.xxx.xxx; maximum length is 15 bytes.
TFTP File Path This column can enter numbers or strings; maximum length is