Visara iCON-XT Installation - Manual (Page 23)

707097-001 3-1
Chapter 3. Maintenance
Important Safety Guidelines
Caution: This product shall only be accessed, assembled and serviced by technically
qualified personnel or technicians.
To avoid personal injury and property damage, please read all the information provided
in Chapter 1, and carefully follow all the Safety Guidelines listed before accessing or
servicing the server or its components. For your convenience, some Safety Steps are
also listed below:
Safety Steps
Before accessing the chassis:
1. Turn off all peripheral devices and turn off the power supply connected to the server.
2. Unplug all power cords from the system or the wall outlets.
3. Disconnect all the cables and label the cables for easy identification.
4. Use a grounded wrist strap designed to prevent static discharge when handling
components.
After completing the above steps, you can remove the chassis covers and install
components and devices into the chassis as described in this chapter.
Note: The hard drive(s) and the power supply(s) may be removed and replaced without
first removing the chassis cover.
Tools needed
1. Phillips Screw Driver
2. Antistatic Strap