Visara iCON-XT Installation - Manual (Page 18)

2-6 707097-001
ICON-XT Server - Installation and Maintenance Manual
3. Locate the five rail buttons on each side of the chassis and locate the five
corresponding holes on each of the inner rail.
(Please note that one end of the hole is larger than the other end of the hole.)
3
4
4. Align the larger end of each hole against its corresponding button. Once all
aligned, push the holes toward their corresponding buttons and the rail is placed
on the chassis.
5. Once the rail is placed on the chassis, pull the rail forward until the rail buttons
lock in the small ends of the corresponding holes.
6. Secure the rail to the chassis with a Type G screw (Refer to Page 2-1 for the Type
G screw.) Repeat the above steps to install other rail on the chassis.
5
6
G
Rack Installation
After you have installed the inner rails on the chassis, you are ready to install the
outer rails of rail assemblies to the rack.
(The rails are designed to fit in the racks with the depth of 28" to 33".)