Visara SCON-20L Installation - Manual (Page 79)

707054-005 6-7
Chapter 6. IOCDS Sample Definitions
SAMPLE 6 – Device Candidate List not Specified
LPAR390 LPARZOS PROD3 TEST1
EMIF
72
A single CNTLUNIT and IODEVICE definition is used to define consoles on all four
LPARS, by intentionally not using the Device Candidate list, and by making use of
Channel Path Filtering on the SCON to direct each connection to the correct CU
definition.
CNTLUNIT CUNUMBR=985,PATH=72,UNITADD=((20,16)),UNIT=3174,CUADD=3
RESOURCE PARTITION==((LPAR390,1),(LPARZOS,2),(PROD3,3),(TEST1,1)
CHPID PATH==(72),PARTITION=((LPAR390,LPARZOS,PROD3,TEST1)),TYPE=CNC,SHARED
IODEVICE CUNUMBR=985,ADDRESS=(800,16),UNIT=3270-X,UNITADD=2
Notes:
1. Since there is no PARTITION parameter displayed in the IODEVICE statement, the
IODEVICE and CNTLUNIT definitions are valid in all partitions sharing the path.
The attached SCON must have a CU defined to communicate with each of the four
partitions.
2. Channel Path Filtering must be configured as the protocol since the same CUADD
applies to each of the four CU definitions.