Sample 4 - emif used, no director, Emif used, no director, Sample 4 - emif used, no director -5 – Visara SCON-20L Installation User Manual
Page 77: Chapter 6. iocds sample definitions
707054-005
6-5
Chapter 6. IOCDS Sample Definitions
SAMPLE 4 - EMIF Used, No Director
LPAR390
TEST1
1F
EMIF
With EMIF support, both LPARs can share the channel path to the SCON.
CNTLUNIT CUNUMBR=1E00,PATH=1F,UNITADD=((00,5)),UNIT=3174,CUADD=0
CNTLUNIT CUNUMBR=1F00,PATH=1F,UNITADD=((00,5)),UNIT=3174,CUADD=1
RESOURCE PARTITION=((LPAR390,1),(TEST1,2))
CHPID PATH=(1F),PARTITION=((LPAR390,TEST1)),TYPE=CNC,SHARED
IODEVICE CUNUMBR=1E00,ADDRESS=(600,5),UNIT=3270-X,UNITADD=00,PARTITION=(TEST1)
IODEVICE CUNUMBR=1F00,ADDRESS=(600,5),UNIT=3270-X,UNITADD=00,PARTITION=(LPAR390)
Notes:
1. Different CUADD values are required for each CNTLUNIT macro sharing the single
ESCON interface, unless Channel Path Filtering is configured.
2. The PATH value for each CNTLUNIT macro is the same.
3. The Device Candidate List has been properly configured on the host (required if
Channel Path Filtering is not configured) since the IODEVICE statement displays
the PARTITION parameter with a single LPAR specified.