Visara SCON-20L Installation - Manual (Page 36)

3-18 707054-005
SCON-20L/22L/25L/28L/3074 Planning and Installation Guide
TN3270 Client Definition Panel
TN3270 Client Definition Panel 000 LINCS C8.2 Central Control
Line Port IP Address Type 3270 Host LU
---- ---- --------------- ---- ---------- --
FET1 00983 207 015 182 113 VisaraNCT PW OS390_prod4 06
FET1 01067 207 015 182 117 VisaraNCT PW VMESA_prod3 06
FET1 01187 207 015 182 119 Client PW OS390_prod4 07
FET1 00224 ___ ___ ___ ___ VisaraNCT PW 3270 Class:TN3270E_CLIENTS __
FET1 00225 ___ ___ ___ ___ VisaraNCT PW 3270 Class:TN3270E_VM __
FET1 01677 ___ ___ ___ ___ Client ID OS390_prod4 01
FET1 01678 ___ ___ ___ ___ Client ID VMESA_prod3 01
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
FET1 _____ ___ ___ ___ ___ Client Disable __
PF: 1-Menu 3-Auto 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
This panel is used to make session assignments to clients connecting into the SCON
using a TN3270E client.
The first three entries on the panel make specific host session assignments to users
connecting in with specific IP addresses.
The next two entries assign users connecting in with addresses other than those defined,
to sessions defined to the 3270 Host Classes defined on the previous panel.
In each example above, non-standard TCP ports are being used to enhance security.
Also, as indicated in the Type column, the Telnet password will be required when the
user connects up.
Note that definitions intended for UCT-Ls, 500-LX NCTs, 1783 NCTs, 1883 NCTs,
and 1683 NCTs may be configured as a “VisaraNCT” or “VisaraNCT PW” in the Type
column. Doing so adds another level of security (PCs with emulators will not establish
a connection to these types). If an 1174 with coax terminals will be used to provide
remote TN3270 access, they too may be configured as a VisaraNCT or VisaraNCT PW.
These definitions will cause the SCON to negotiate the Command Chaining extension
with the NCT or 1174, allowing them to function as consoles. These definitions are only
compatible with the UCT-L, 500-LX, 1783, 1883, and 1683 or a downstream 1174 with
coax terminals and should not be used for any other type of device.