Visara SCON-20L Installation - Manual (Page 47)

707054-005 3-29
Chapter 3. Configuring the SCON
Besides providing a configuration for the IP network parameters (IP Address, Subnet
Mask, and Default Router/Gateway), a configuration of how many Telnet Host
Connections that are desired is made. This value determines the maximum number of
sessions that can be established by this feature concurrently using a combination of
Telnet/TN3270.
ASCII Session Profile
ASCII Session Profile 00 LINCS C8.2 Central Control
Profile Name: Houston
Answer Back Sequence: _________________________
Disconnect Sequence: _________________________
Terminal Emulation: DEC VT2xx Timer Disc: 0000
Translate Tables: Primary Bold: Normal
Character Set: NRC VT2xx Control: 8 bit
Tab Motion: Direct Auto Wrap: Disable
Newline: Disable Cursor Keys: Normal
Keypad Mode: Numeric Numeric Keypad: Decimal
Cursor: Disable Margin Bell: Disable
Formfeed: Linefeed Column Change: Preserve
3101 Turnaround Char: CR 3101 CR Key: CR
3101 Scroll: Disable
Break Time (msec): 300 Duplex: Full
PF: 1-Menu 3-Def_Dflt 7-Back 8-Forw 9-Default 10-Done
At least one ASCII Host Session profile panel must be configured to support the Telnet
or TN3270E host sessions. The most relative items have been highlighted, and are used
to define the type of emulation that will be used for a Telnet connection. This emulation
is also used initially for TN3270E, while the TN3270E negotiations are proceeding.
Each profile panel can be assigned to multiple user sessions as needed.
A second panel providing the Telnet/TN3270 options must also be configured. The
configuration of the next panel determines whether the session is to be Telnet or TN3270.
An example configuration for each is provided.