Verilink PRISM 41TDM (34-00275.4) Product Manual - Manual (Page 71)

TxPORT 63
ddsDteDsrControlTestOff(1) - DSR is on except when the unit is in test
ddsDteDsrControlForcedOn(2) - DSR is on regardless of any unit condition
ddsDteDcdControl: (read-write)
Allows you to review and configure the DTE DCD lead (Circuit 109/CF).
ddsDteDcdControlIdleOff(1) - DCD is on except when the unit is receiving
Idle Code from the network.
ddsDteDcdControlForcedOn(2) - DCD is on regardless of any unit condition
ddsDteRtsControl: (read-write)
Allows you to review or configure the DTE RTS and CTS leads (Circuit 105/CA
and 106/CB).
ddsDteRtsControlNormal(1) - RTS, Circuit Assurance, and Antistreaming
control CTS
ddsDteRtsControlForcedOn(2) - RTS is ignored, CTS is on regardless of any
unit condition
ddsDteDtrAlarm: (read-write)
Allows you to enable or disable monitoring on the DTR lead (Circuit 108/CD).
ddsDteDtrAlarmEnabled(1) - DTR low is an alarm condition
ddsDteDtrAlarmDisabled(2) - DTR is ignored
ddsDteRLDetect: (read-write)
Allows you to override the DTE RL input pin on the Remote Loopback lead
(Circuit 140/RLB)
ddsDteRLDetectEnabled(1) - RLB high activates the Remote V.54 Loop
ddsDteRLDetectDisabled(2) - RLB is ignored
ddsDteLLDetect: (read-write)
Allows you to override the DTE LL input pin on the Local Loopback lead (Circuit
141/LLB).
ddsDteLLDetectEnabled(1) - LLB high activates the Local Loop
ddsDteLLDetectDisabled(2) - LLB is ignored
TxPORT The TxPORT enterprise proprietary MIB contains objects that allow unit
management from any SNMP manager. Far End parameters can only be retrieved
when the unit is configured for proprietary mode of operation on both ends of the
network.
companyName (read-only)
Displays the company name (TxPORT, Inc.).