Verilink PRISM 41TDM (34-00275.4) Product Manual - Manual (Page 54)

46 C HAPTER 4: T ERMINAL I NTERFACE
LAN Connection
This field allows selecting SLIP interface for the network connection.
PRISM IP Address
This field accepts IP addresses. Each device connected to the LAN is required to
have a unique IP address identifier.
Subnet Mask
This field is provided to manually override the subnet mask setting which is
otherwise discovered by the TCP/IP software.
Router IP Address
This field accepts the IP address of the default router.
Filter IP Address
These eight fields accept the IP address of the source packet filter. If any of these
fields are set, access is allowed only by the specified IP addresses.
SNMP
Configuration
The SNMP Configuration screen (Figure 4-12) is accessible for the SLIP, Ethernet
or Token Ring SNMP interface. It allows for the entry of those parameters required
for proper operation with an SNMP -based network manager.
Figure 4-12 SNMP Configuration Screen
The PRISM 41TDM supports alarm reporting by SNMP TRAPs when running the
LAN or SLIP interface. If the unit’s IP connection is LAN or direct SLIP, it
expects an IP connection to always be present and thus sends its TRAP messages
immediately. If the IP connection is dial SLIP, the unit dials out from the modem
connected to the SLIP port using the number programmed in the SNMP
Configuration screen and sends trap messages upon connection.