Slipport(serial line internet protocol), Ethernet(optional), Tokenring(optional) – Verilink PRISM 41TDM (34-00275.4) Product Manual User Manual
Page 14: Dial backup, Power, Mechanical, Environmental, Compatibility, Power mechanical environmental compatibility

6
C
HAPTER
1: G
ENERAL
SLIP Port (Serial Line Internet Protocol)
Connection:
8-pin modular (RS-232)
Data Rates:
1.2, 2.4, 9.6, & 19.2 kbps
E
THERNET
(optional)
Connection:
8-pin modular
Network Protocol:
TCP/IP-based networks
Data Rate:
10 Mbps
Compatibility:
10BASE-T, ISO/IEC 8802-3
T
OKEN
R
ING
(optional)
Connection:
8-pin modular
Network Protocol:
TCP/IP-based networks
Data Rate:
4 and 16 Mbps
Compatibility:
Type 3 UTP, ISO/IEC 8802-5
Dial Backup
Connection: 6-pin
modular
Backup Service:
ISDN, sync
Configuration:
Information for backup unit is stored in 41TDM and
transmitted to backup unit by inband AT commands
Dialing:
Numbers programmed and stored in 41TDM, and transmitted
to backup unit by inband AT commands
Restoral:
Manual or automatic restoral to leased line service
Power
115 VAC:
116 mA, 8 watts, 27 BTU maximum
Mechanical
Housing:
Plastic standalone case
Mounting:
Desktop or horizontal rack
Dimensions:
12 inches (30.40 cm) wide
2 inches (5.08 cm) high
9 inches (22.86 cm) deep
Environmental
Operating Temp:
32
°
to 122
°
F (0
°
to 50
°
C)
Storage Temp:
−
4
°
to 185
°
F (
−
20
°
to 85
°
C)
Humidity:
95% Maximum (Non-Condensing)
Compatibility
TR62310: November
1987
TR62310A:
December 1989 (addendum 3)
TR41450:
November 1981