Verilink NCM 2000 (880-502623-001) Product Manual - Manual (Page 55)

Administration Menu
Verilink NCM 2000
3-13
Exiting the
Administration
Menu
The command option:
X) exit this screen
returns you to the NCM Main Menu.
R
Dial-Out connect retries. The number of attempts the NCM is to make each time it
attempts to dial out to the trap host.
K
Dial-Out connect timeout. The length of time in seconds that the NCM will wait for
DCD, a value of zero disables this option and allows modem shift register 7 to handle
timeout.
I
Dial-Out inactive timeout. Length of time in seconds that the NCM will allow the
connection to remain established when idle (no data). A value of zero disables this
option.
S
Dial-Out. Commands the modem to dial the phone number shown NOW. Useful for
testing the modem configuration.
W
Set default commands. Restores all of the user options on this submenu to factory
defaults.
H
Hangup. Commands the modem to hangup and return to an on-hook condition. This
might be used to end a modem test.
A
Answer. Commands the modem to answer now. Use to verify that the NCM and
modem are communicating properly.
X Exits the Modem Configuration Menu and returns to the Administration Menu above.
Command
Usage