Verilink NCM 2000 (880-502623-001) Product Manual - Manual (Page 50)

Administration Menu
3-8
Verilink NCM 2000
Figure 3-6 Password Menu
From the Password menu, select the S) Set System Superuser
Password option:
[0.0.0.1] [3,11] NCM 2000 > s
You are prompted through the following sequence:
Figure 3-7 Password Menu, Setting the System Superuser Password
Note that you must know the current system superuser password
in order to change it. The Password Menu reappears.
Figure 3-8 Password Menu, Setting the Superuser Password
A similar procedure is used to set the password for the other access
levels.
If the NCM is using its default set of passwords and no password
was typed upon starting the Craft interface, then the session will be
at the Privileged access level.
The Network Configuration Menu
The NCM can be connected to a local area network using the
(provided) Ethernet transceiver. This provides support for Node
Manager and Telnet sessions by allowing connections to the NCM
over the LAN. SLIP provides another alternative via an
asynchronous connection, often over a modem. The Network
Configuration Menu is used to configure parameters that integrate
the NCM into a TCP/IP network.
-- PASSWORD MENU -- -- PASSWORD MENU -- -- PASSWORD MENU -- -- PASSWORD MENU --
S) Set System Superuser Password A) Set Superuser Password
S) Set System Superuser Password A) Set Superuser Password S) Set System Superuser Password A) Set Superuser Password S) Set System Superuser Password A) Set Superuser Password
P) Set Privileged User Password U) Set Unprivileged User Password
P) Set Privileged User Password U) Set Unprivileged User Password P) Set Privileged User Password U) Set Unprivileged User Password P) Set Privileged User Password U) Set Unprivileged User Password
D) Set Default Passwords W) Display 3 Levels of Password
D) Set Default Passwords W) Display 3 Levels of Password D) Set Default Passwords W) Display 3 Levels of Password D) Set Default Passwords W) Display 3 Levels of Password
X) exit menu
X) exit menu X) exit menu X) exit menu
[0.0.0.1] [2,13] NCM 2000 >
[0.0.0.1] [2,13] NCM 2000 > [0.0.0.1] [2,13] NCM 2000 > [0.0.0.1] [2,13] NCM 2000 >
[0.0.0.1] [2,13] NCM 2000 >Old System Superuser password: [0.0.0.1] [2,13] NCM 2000 >Old System Superuser password: [0.0.0.1] [2,13] NCM 2000 >Old System Superuser password: [0.0.0.1] [2,13] NCM 2000 >Old System Superuser password:
***
*** *** ***
Enter New System Superuser Password (1-16 chars): ***
Enter New System Superuser Password (1-16 chars): *** Enter New System Superuser Password (1-16 chars): *** Enter New System Superuser Password (1-16 chars): ***
-- PASSWORD MENU -- -- PASSWORD MENU -- -- PASSWORD MENU -- -- PASSWORD MENU --
S) Set System Superuser Password A) Set Superuser Password
S) Set System Superuser Password A) Set Superuser Password S) Set System Superuser Password A) Set Superuser Password S) Set System Superuser Password A) Set Superuser Password
P Set Privileged User Password U) Set Unprivileged User Password
P Set Privileged User Password U) Set Unprivileged User Password P Set Privileged User Password U) Set Unprivileged User Password P Set Privileged User Password U) Set Unprivileged User Password
D) Set Default Passwords W) Display 3 Levels of Password
D) Set Default Passwords W) Display 3 Levels of Password D) Set Default Passwords W) Display 3 Levels of Password D) Set Default Passwords W) Display 3 Levels of Password
X) exit menu
X) exit menu X) exit menu X) exit menu
[0.0.0.1] [2,13] NCM 2000 >
[0.0.0.1] [2,13] NCM 2000 > [0.0.0.1] [2,13] NCM 2000 > [0.0.0.1] [2,13] NCM 2000 >