Verilink NCM 2000 (880-502623-001) Product Manual - Manual (Page 49)

Administration Menu
Verilink NCM 2000
3-7
• Unprivileged level (level 1—lowest)
NCM access levels always allow comparable access to the
application modules being managed. These different levels of
security access (passwords) reflect different capabilities, described
in
Table 3-3 .
Table 3-3 Access Levels:
Displaying
Passwords
Log-in to the NCM using the current system superuser password.
From the Password Menu, type the command option:
[0.0.0.1] [3,11] NCM 2000 > w
The following report is displayed:
Figure 3-5 Password Menu, Display 3 Levels of Password
System
Superuser
Password
The system superuser has the highest access level. In the Craft
interface this is shown as Access Level 4 on the Main Menu. Only
the system superuser may set the system superuser password.
Options Access Level 1
Unprivileged
Access Level 2
Privileged
Access Level 3
Superuser
Access Level 4
System
Superuser
Default Password E NTER
E NTER “sutest” “systest”
Local node configuration settings Read Write Write Write
Diagnostic Tests No access Write Write Write
Loopbacks No access Write Write Write
Remote NCM configuration No access No access Write Write
Remote application module
configuration
No access No access Read Write
Set passwords for levels 1-3 No access No access Write Write
Set passwords for levels 1-4, local
and remote
No access No access No access Write
-- PASSWORD MENU -- -- PASSWORD MENU -- -- PASSWORD MENU -- -- PASSWORD MENU --
Superuser Password: 222
Superuser Password: 222 Superuser Password: 222 Superuser Password: 222
Privileged User Password: 333
Privileged User Password: 333 Privileged User Password: 333 Privileged User Password: 333
Unprivileged User Password: 444
Unprivileged User Password: 444 Unprivileged User Password: 444 Unprivileged User Password: 444
[0.0.0.1] [2,13] NCM 2000 >
[0.0.0.1] [2,13] NCM 2000 > [0.0.0.1] [2,13] NCM 2000 > [0.0.0.1] [2,13] NCM 2000 >