Verilink NCM 2000 (880-502623-001) Product Manual - Manual (Page 46)

Administration Menu
3-4
Verilink NCM 2000
Selecting a Node
To access the node selection submenu, use the S command option
on the Administration Menu:
S) Node Selection
Node
Management
Menu
The Node Management Menu is presented:
Figure 3-1 Node Management Menu
Use the L command for a list of nodes. The nodes are listed under
the headings “local” and “remote”.
In order for nodes to be listed, they must be entered using:
A) add node
on the NCM Node Management Menu, or result from node list
configuration options available on the HDM 2180 or HDM 2182
modules. Nodes are numbered from 0 in the order in which they
are entered.
Access to a node is not allowed when the far-end inband channel is
supported by the HDM 2182 and the far-end inband management
option is disabled. The far end management option is the capability
of a node to “block” the access from a far-end node.
When a remote node is selected, a prompt confirms your selection:
Selected remote node: [0.0.0.5] shelf = 0, slot = 11
Figure 3-2 Node Management Menu
When logically positioned at a remote node and a command of x)
exit this menu is entered from the Main Menu, control returns to
the Main Menu of the local node.
-- NCM NODE MANAGEMENT MENU -- -- NCM NODE MANAGEMENT MENU -- -- NCM NODE MANAGEMENT MENU -- -- NCM NODE MANAGEMENT MENU --
A) add node Dn) delete node
A) add node Dn) delete node A) add node Dn) delete node A) add node Dn) delete node
L) List nodes Sn) select/manage node
L) List nodes Sn) select/manage node L) List nodes Sn) select/manage node L) List nodes Sn) select/manage node
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
Note: Selection of a node to manage will cause the terminal
Note: Selection of a node to manage will cause the terminal Note: Selection of a node to manage will cause the terminal Note: Selection of a node to manage will cause the terminal
to move to the main menu displaying the requested
to move to the main menu displaying the requested to move to the main menu displaying the requested to move to the main menu displaying the requested
node.
node. node. node.
-- NCM NODE MANAGEMENT MENU -- -- NCM NODE MANAGEMENT MENU -- -- NCM NODE MANAGEMENT MENU -- -- NCM NODE MANAGEMENT MENU --
A) add node Dn) delete node
A) add node Dn) delete node A) add node Dn) delete node A) add node Dn) delete node
L) List nodes Sn) select/manage node
L) List nodes Sn) select/manage node L) List nodes Sn) select/manage node L) List nodes Sn) select/manage node
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
Note: Selection of a node to manage will cause the terminal
Note: Selection of a node to manage will cause the terminal Note: Selection of a node to manage will cause the terminal Note: Selection of a node to manage will cause the terminal
to move to the main menu displaying the requested node.
to move to the main menu displaying the requested node. to move to the main menu displaying the requested node. to move to the main menu displaying the requested node.
A [0.0.0.7] [1,1] NCM 2000 >
A [0.0.0.7] [1,1] NCM 2000 > A [0.0.0.7] [1,1] NCM 2000 > A [0.0.0.7] [1,1] NCM 2000 >