Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 59)

HDM 2180 Management: Using NCM 2000
Verilink HDM 2180 User Manual 4-13
HDM Transmit
Alarm Options
Selecting T from the Diagnostics Menu displays the HDM
Transmit Alarm Options screen. By transmitting any of these
alarms, you can verify if the far end is receiving the alarm signal.
Figure 4-12 HDM Transmit Alarm Options Menu
D Deactivate Loopback—Displays any active tests present, and gives options for deactivating
various loopback tests.
Options presented for deactivation are:
1) Local
2) Payload
3) HSSI
4) FEAC
5) Far-End
X Exit this Screen—Returns you to the HDM 2180 Diagnostics Menu, Figure 4-7 .
Command Description
[127.255.255.0] [1,6] HDM 2180 > t [127.255.255.0] [1,6] HDM 2180 > t [127.255.255.0] [1,6] HDM 2180 > t [127.255.255.0] [1,6] HDM 2180 > t
-- HDM Transmit Alarm Options --
-- HDM Transmit Alarm Options -- -- HDM Transmit Alarm Options -- -- HDM Transmit Alarm Options --
1) Yellow Disabled
1) Yellow Disabled 1) Yellow Disabled 1) Yellow Disabled
2) AIS Disabled
2) AIS Disabled 2) AIS Disabled 2) AIS Disabled
3) Idle Disabled
3) Idle Disabled 3) Idle Disabled 3) Idle Disabled
4) FEBE Disabled
4) FEBE Disabled 4) FEBE Disabled 4) FEBE Disabled
5) FEAC No FEAC Alarm
5) FEAC No FEAC Alarm 5) FEAC No FEAC Alarm 5) FEAC No FEAC Alarm
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
[127.255.255.0] [1,6] HDM 2180 >
[127.255.255.0] [1,6] HDM 2180 > [127.255.255.0] [1,6] HDM 2180 > [127.255.255.0] [1,6] HDM 2180 >