Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 56)

HDM 2180 Management: Using NCM 2000
4-10 Verilink HDM 2180 User Manual
Diagnostics Menu
Selecting D from the Main Menu displays the Diagnostics Menu,
which allows you to display status reports, to configure loopbacks,
and to transmit test alarms.
Figure 4-7 HDM 2180 Diagnostics Menu
Table 4-8 HDM 2180 Diagnostics Menu Commands
DS3 HSSI Status
Report
Pressing H from the Diagnostics Menu displays the DS3 HSSI
Status Report for the HSSI Port. Pressing the E
NTER key returns you
to the Diagnostics Menu.
Figure 4-8 DS3 HSSI Status Report
Command Description
H HSSI Status Report—Displays the DS3 HSSI Status Report, Figure 4-8 , which gives the
current status of the control leads and indicates whether or not the HSSI port is In Service.
P Port Status Report—Displays the DS3 Port Status Report, Figure 4-10 , which shows
whether any alarm conditions or loopbacks are detected at the DS3 port.
L Loopback Configure—Displays the HDM Loopback Options Menu, Figure 4-11 , Table
4-9 .
T Transmit Alarms—Displays the HDM Transmit Alarms Menu, Figure 4-12 , Table 4-10 .
X Exit this Screen—Returns you to the Main Menu, Figure 4-1 .
[127.255.255.0] [1,6] HDM 2180 > d [127.255.255.0] [1,6] HDM 2180 > d [127.255.255.0] [1,6] HDM 2180 > d [127.255.255.0] [1,6] HDM 2180 > d
-- HDM 2180 DIAGNOSTICS MENU --
-- HDM 2180 DIAGNOSTICS MENU -- -- HDM 2180 DIAGNOSTICS MENU -- -- HDM 2180 DIAGNOSTICS MENU --
H) HSSI Status Report P) Port Status Report
H) HSSI Status Report P) Port Status Report H) HSSI Status Report P) Port Status Report H) HSSI Status Report P) Port Status Report
L) Loopback Configure T) Transmit Alarms
L) Loopback Configure T) Transmit Alarms L) Loopback Configure T) Transmit Alarms L) Loopback Configure T) Transmit Alarms
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
[127.255.255.0] [1,6] HDM 2180 >
[127.255.255.0] [1,6] HDM 2180 > [127.255.255.0] [1,6] HDM 2180 > [127.255.255.0] [1,6] HDM 2180 >
[127.255.255.0] [1,6] HDM 2180 > h [127.255.255.0] [1,6] HDM 2180 > h [127.255.255.0] [1,6] HDM 2180 > h [127.255.255.0] [1,6] HDM 2180 > h
-- DS3 HSSI STATUS REPORT --
-- DS3 HSSI STATUS REPORT -- -- DS3 HSSI STATUS REPORT -- -- DS3 HSSI STATUS REPORT --
CIM 2080 DS3
CIM 2080 DS3 CIM 2080 DS3 CIM 2080 DS3
In Service
In Service In Service In Service
Feature --------------------- State
Feature --------------------- State Feature --------------------- State Feature --------------------- State
DCE Ready On
DCE Ready On DCE Ready On DCE Ready On
DTE Ready Off
DTE Ready Off DTE Ready Off DTE Ready Off
Loopback A Off
Loopback A Off Loopback A Off Loopback A Off
Loopback B Off
Loopback B Off Loopback B Off Loopback B Off
Test Mode Off
Test Mode Off Test Mode Off Test Mode Off
Equipment Loopback Off
Equipment Loopback Off Equipment Loopback Off Equipment Loopback Off
Press enter to continue
Press enter to continue Press enter to continue Press enter to continue