Ds3 port status report, Loopback options menu, Figure 4-10 – Verilink HDM 2180 (880-503048-001) Product Manual User Manual

Page 57: Figure 4-11

HDM 2180 Management: Using NCM 2000

Verilink HDM 2180 User Manual

4-11

Figure 4-9

DS3 Port Status

Report

Selecting P from the Diagnostics Menu displays the DS3 Port
Status Report. Pressing the E

NTER

key returns you to the

Diagnostics Menu.

Figure 4-10 DS3 Port Status Report

Loopback

Options Menu

Selecting L) Loopback Configure from the Diagnostics Menu
displays the Loopback Options Menu. See (

Table 4-9

) for the types

of loopbacks available.

Figure 4-11 HDM 2180 Loopback Options Menu

DTE
or
Test
Set

Port 1

Framer

Port 1

Loopback A

Loopback B

[127.255.255.0] [1,6] HDM 2180 > p

[127.255.255.0] [1,6] HDM 2180 > p
-- DS3 PORT STATUS REPORT --

-- DS3 PORT STATUS REPORT --

-- DS3 PORT STATUS REPORT --
ALARM ----------------------- State

ALARM ----------------------- State

ALARM ----------------------- State
AIS No

AIS No

AIS No
IDLE No

IDLE No

IDLE No
Yellow Alarm Yes

Yellow Alarm Yes

Yellow Alarm Yes
Frame Loss Yes

Frame Loss Yes

Frame Loss Yes
Signal Loss Yes

Signal Loss Yes

Signal Loss Yes
Local loopback Disabled

Local loopback Disabled

Local loopback Disabled
Payload loopback Disabled

Payload loopback Disabled

Payload loopback Disabled
FEAC loopback Disabled

FEAC loopback Disabled

FEAC loopback Disabled
Far-End loopback Disabled

Far-End loopback Disabled

Far-End loopback Disabled
Press enter to continue

Press enter to continue

[127.255.255.0] [1,6] HDM 2180 > l

[127.255.255.0] [1,6] HDM 2180 > l
-- HDM 2180 LOOPBACK OPTIONS MENU --

-- HDM 2180 LOOPBACK OPTIONS MENU --

-- HDM 2180 LOOPBACK OPTIONS MENU --
A) Activate loopback D) Deactivate loopback

A) Activate loopback D) Deactivate loopback

A) Activate loopback D) Deactivate loopback
X) Exit this screen

X) Exit this screen

X) Exit this screen
[127.255.255.0] [1,6] HDM 2180 >

[127.255.255.0] [1,6] HDM 2180 >