Verilink HDM 2180 (880-503048-001) Product Manual User Manual
Page 32
Standalone HDM 2180 Management
3-8
Verilink HDM 2180 User Manual
E
DS3 Port Equipment ID—An optional field in which to describe the type of DTE used.
Displays the current value and provides a prompt asking if you want to change the value as
follows (10 characters maximum):
HDM > e
Current DS3 Port Equipment ID: . Change (Y/N)? y
Please enter new DS3 Port Equipment ID(10):
O
DS3 Port Location ID—An optional field in which to describe the location of the module.
Displays the current value and provides a prompt asking if you want to change the value as
follows (11 characters maximum):
HDM > o
Current DS3 Port Location ID: . Change (Y/N)? y
Please enter new DS3 Port Location ID(11):
F
DS3 Port Frame ID—An optional field. Displays the current value and provides a prompt
asking if you want to change the value as follows (10 characters maximum):
HDM > f
Current DS3 Port Frame ID: . Change (Y/N)? y
Please enter new DS3 Port Frame ID(10):
U
DS3 Port Unit ID—An optional field. Displays the current value and provides a prompt
asking if you want to change the value as follows (6 characters maximum):
HDM > u
Current DS3 Port Unit ID: . Change (Y/N)? y
Please enter new DS3 Port Unit ID(6):
I
DS3 Port Facility ID—An optional field. Displays the current value and provides a prompt
asking if you want to change the value as follows (38 characters maximum):
HDM > i
Current DS3 Port Facility ID: . Change (Y/N)? y
Please enter new DS3 Port Facility ID(38):
P
DS3 Port ID—An optional field. Displays the current value and provides a prompt asking if
you want to change the value as follows (38 characters maximum):
HDM > p
Current DS3 Port ID: . Change (Y/N)? y
Please enter new DS3 Port ID(38):
G
DS3 Port Test Sig ID—An optional field. Displays the current value and provides a prompt
asking if you want to change the value as follows (38 characters maximum):
HDM > g
Current DS3 Test Sig Generator ID: . Change (Y/N)? y
Please enter new DS3 Port Test Sig Generator ID(38):
X
exit menu—Returns you to the Port Configuration Menu,
.
Command Description