Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 55)

HDM 2180 Management: Using NCM 2000
Verilink HDM 2180 User Manual 4-9
remote DS3 units, you will be required to manually enter the
information under the Administration Menu option "Node
Selection".
NOTE: If you erroneously save an incorrect configuration using
"Update NCM Node Table" you will have to go to the
Administration Menu option "Node Selection" to delete the
incorrect information.
Figure 4-6 Remote End Setup Menu
Table 4-7 Remote End Setup Menu Commands
Command Description Options
B Inband—Toggles Enable/Disable for an inband channel between the NE
and FE DS3 ports.
1) Enable
2) Disable
A Node Address—Enter the appropriate Node Address according to
instructions from your system administrator.
www.xxx.yyy.zzz
I Node ID—Enter the appropriate Node ID according to instructions from
your system administrator.
www.xxx.yyy.zzz
N Site Name—Use no more than 19 alpha-numeric characters for this
field.
U Update NCM Node Table—This option enables you to save the node
information in the local NCM for later use. This option should always
be used before leaving this screen if changes have been made to the
configuration. Using this option will update the information available
under the Administration Menu option, "Node Selection".
X Exit this screen—Returns you to the Main Menu, Figure 4-1 .
A [100.94.46.50] [0,4] HDM 2180 > r A [100.94.46.50] [0,4] HDM 2180 > r A [100.94.46.50] [0,4] HDM 2180 > r A [100.94.46.50] [0,4] HDM 2180 > r
--- Data Link Layer Remote Configuration --- --- Data Link Layer Remote Configuration --- --- Data Link Layer Remote Configuration --- --- Data Link Layer Remote Configuration ---
Port Node Address Node Id Name Inband
Port Node Address Node Id Name Inband Port Node Address Node Id Name Inband Port Node Address Node Id Name Inband
1 100.94.46.50 0 VERILINK Corp, San N/Y
1 100.94.46.50 0 VERILINK Corp, San N/Y 1 100.94.46.50 0 VERILINK Corp, San N/Y 1 100.94.46.50 0 VERILINK Corp, San N/Y
B) Inband A) Node Address
B) Inband A) Node Address B) Inband A) Node Address B) Inband A) Node Address
I) Node Id N) Sitename
I) Node Id N) Sitename I) Node Id N) Sitename I) Node Id N) Sitename
U) Update NCM Node Table X) Exit this screen
U) Update NCM Node Table X) Exit this screen U) Update NCM Node Table X) Exit this screen U) Update NCM Node Table X) Exit this screen
A [100.94.46.50] [0,4] HDM 2180 >
A [100.94.46.50] [0,4] HDM 2180 > A [100.94.46.50] [0,4] HDM 2180 > A [100.94.46.50] [0,4] HDM 2180 >